Tripp Lite Switch PAM 3 User Manual

Instruction Sheet

PAM-3

1111 W. 35th Street

Chicago, IL 60609 USA

Customer Support: (773) 869-1234

Power Accessory Module

The PAM-3 Power Accessory Module provides a wide variety of electrical outlets for the output of a

Tripp Lite UPS system. The PAM-3 may be hardwired to the output of a Unison SmartOnLine^®

SU6K or SU10K.

Safety:

• The PAM-3 features both 120V and 208/240V outlets. Make sure to connect equipment to

receptacles of the correct voltage.

• A total load of 30 amps can be drawn from the PAM-3. When connecting equipment,

take care not to exceed this current rating.

Connecting a PAM-3 to the Output of a SmartPro

DataCenter or PAM-1

• Simply plug your PAM-3's NEMA L14-30P plug into the NEMA L14-30R output

receptacle on the rear of your SmartPro DataCenter unit or on the front of your PAM-1.

Unison SmartOnLine^®and SmartPro DataCenter^®are registered trademarks of Tripp Lite.